Fully automatic packaging sealing box Bundle is a sealing box, packaged automated machine equipment. The principle used is to extend the sealing machine belt, and the item is delivered to the platform of the baler with a drive belt of the box machine, and the entire device is controlled by the same PLC.

In doing so that the customer sealing the needs of the overall job, it also saves the customer a lot of production costs, and the automatic packaging sealing machine can be said to be an economical and practical automation packaging equipment.

The box of the box is the automatic packing of the upper and lower words. It can be completed once, while both side belts are extended, and the automatic strapping machine can be matched, complete the sealing bundles, and one gas.

Regarding the number of bundles, the spacing can be controlled by micro switching on the sealing machine, and the auxiliary guide wheel on both sides of the sealing box is packaged, which can make the cover on the carton, and make the sealing the flat and beautiful. The advantage of packing sealing box is in a suitable range, in addition to standard specifications, additional machine widening, higher processing, and can manually adjust the width and height of the sealing box, do carton suitable for different specifications . The service life of the packaging sealing machine is also very long, it is suitable for use in a single specification carton in the same time.

The functionality of the one machine is very fine, and it is also very solid, smooth running, and it is very smooth. Sealing Boxing Machine Suitable Carton Packaging Sealing Box Packing Machine is very broad, can be applied to painting, printing, photo album, greeting card, photo frame, electronic, cosmetics, medicine, daily chemical industry. The sealing baler is a packaging machine integrating an automatic sealing function and automatic packaging function.

The sealing package can be suitable for different carton packages, which can be used to use automated packaging pipelines, and can automatically adjust according to the specifications of the carton, the height and width of the carton, simple and convenient, and it is very fast. The sealing package can achieve unmanned sealing operation, which can do a single bond to control the entire process, and the speed is very fast, simple, and it is very easy to get started.

The sealing machine is multi-channel package, achieving unmanned automatic operation, high work efficiency, and is very suitable for industrial use in large quantities. Sealing Backer It has a big advantage that it is suitable for different sizes of carton packaging, sealing and packaging and can be carried out at the same time, small volume, no place, economic affordable, very convenient to use, give people a lot Convenience. This sealing machine packaging equipment works fine, its life is also very long, can be used for a long time.

It is also very simple to maintain, as long as you pay more attention to protection during use, you can use it to clean, raise your hand, but you can maintain sealing machine. How do you do if the fully automatic baler is faulty? The decisive factors in the 21st century enterprise development is the development trend of automation. With the development of modern automation, automated baler equipment will have a lot of components in the future development of the enterprise.

The fully automatic baler is one of the baler series, and it is fully automated operation of the baler with a semi-automated baler. This type of machinery uses fully automated design based on the original baler, it is simple to operate, more durable, is an ideal package device.

Below we share the full automatic baler fault repair knowledge, in general, the more common faults of the package machine have the following:

1, the tape phenomenon, the main manifestation is that the belt card is in the middle of the roller, or it cannot be operated, or the foreign body is unable to take it, causing a cassette, then the technical personnel or operator needs to disassemble the hexa nut. The gasket is released. Connect the two M5 countersunk screws on the axial center, since the two screws are fixed in the gap portions of the connecting axis, the screws must be transferred; remove the axial heart, pick up the upper turn, take out the card , Then restore the machine to the original look, simple operation, I believe you can do better.

2, the bundle machine does not cut the machine, and most of this case will generally have the tightness of the packing belt, and the operator needs to adjust the looseness.

3, the baler does not bring, this type of failure is more common, the operator wants to check if the band length adjustment is, then see if the wear process is correct; if not, see if the belt roller is caught. Warm reminder: In daily work, when the baler failure occurs, it should be repaired according to the relevant symptoms of the machine, must not be dealt with, otherwise, due to improper operation, it can cause certain damage to the machine, resulting in an unpleasant consequence As the packaging equipment such as the baler, sealing machine, etc.

In addition, the baler or other packaging machinery equipment needs to be reasonably used, and it is not possible to pack items outside the load-bearing range. We should pay more attention to the machine's maintenance and maintenance, so that the fault is reduced, extend the baler Life can also play a role.